Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/602822
Full metadata record
DC FieldValueLanguage
dc.coverage.spatial
dc.date.accessioned2024-11-25T12:17:28Z-
dc.date.available2024-11-25T12:17:28Z-
dc.identifier.urihttp://hdl.handle.net/10603/602822-
dc.description.abstractThe natural circulation loop (NCL) efficiently transfers energy from a high-temperature source to a low-temperature newlinesink without direct contact. The key driving force in natural circulation systems is buoyancy, caused by density differences. Single-phase NCLs face limitations from saturation temperature and low flow rates, while two-phase loops risk dry-out and complex flow regimes. Supercritical fluids offer an alternative, combining the benefits of both single- and two-phase systems. The concept of a supercritical natural circulation loop (sNCL) is important for newlineGeneration-IV nuclear reactors. This thesis evaluates sNCLs using CO2 through both numerical and experimental methods. Numerical studies analyze the steady-state and transient behavior of sNCL, using 3D simulations for steady-state and 2D/1D models for transient cases. Buoyancy and friction forces determine system behavior. As newlineheating power increases, buoyancy dominates, leading to a rise in flow rate and heat transfer. However, friction eventually takes over, reducing flow rate and leading to flow-induced heat transfer deterioration (FiHTD). This phenomenon, which can be delayed but not avoided, is key to ensuring safe operation. Based on fluid temperature, four heat transfer zones were identified: low power, enhanced heat transfer, transition, and deteriorated heat transfer. 3D simulations using ANSYS Fluent confirmed the boundary of safe operation, with data fitting a power-law curve. Changes in friction factor along the heater section also signal the onset of FiHTD. The dissertation further explores newlinestatic and dynamic instability in sNCL. Steady-state circulation shows a sharp decline, consistent with previous analyses, and exhibits Ledinegg instability at intermediate power levels. Both static and dynamic instabilities were identified, with results aligning across simulations. Under varying heat input, sinusoidal heating caused chaotic oscillations, while ramp heating remained stable due to gradual buoyancy generation. A 2D model explored startup
dc.format.extent
dc.languageEnglish
dc.relation
dc.rightsself
dc.titleNumerical and Experimental Investigations of Nonlinear Dynamics and Heat Transfer Deterioration in Supercritical Natural Circulation Loop
dc.title.alternative
dc.creator.researcherSrivastava, Tanuj
dc.subject.keywordEngineering
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Mechanical
dc.description.note
dc.contributor.guideBasu, Dipankar Narayan
dc.publisher.placeGuwahati
dc.publisher.universityIndian Institute of Technology Guwahati
dc.publisher.institutionDEPARTMENT OF MECHANICAL ENGINEERING
dc.date.registered2018
dc.date.completed2024
dc.date.awarded2024
dc.format.dimensions
dc.format.accompanyingmaterialNone
dc.source.universityUniversity
dc.type.degreePh.D.
Appears in Departments:DEPARTMENT OF MECHANICAL ENGINEERING

Files in This Item:
File Description SizeFormat 
01_fulltext.pdfAttached File5.94 MBAdobe PDFView/Open
04_abstract.pdf108.51 kBAdobe PDFView/Open
80_recommendation.pdf120.5 kBAdobe PDFView/Open


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: