Please use this identifier to cite or link to this item:
http://hdl.handle.net/10603/519977
Title: | Laser micro cutting and surface texturing of nano boron carbide particulates reinforced copper nanocomposites |
Researcher: | Arun, A |
Guide(s): | Poovazhagan, L |
Keywords: | elecommunications Engineering Engineering and Technology Engineering Mechanical Micromachining micro/nano surface |
University: | Anna University |
Completed Date: | 2023 |
Abstract: | Micromachining has evolved into a key facilitating technology and is widely employed today for the creation of complex micro/nano surface features for the parts used in various industries like nano/micro electro-mechanical systems, medical and telecommunications. At present, fiber lasers have made an increasingly significant contribution to micro-fabrications to generate intricate shapes. The increased usage of copper in micro-domains is attributed to the advancements in personal computing and telecom industry. Against this backdrop, this work focuses upon fabrication of copper-nano-boron carbide (Cu-B4C) Metal Matrix Nanocomposites (MMNCs) of three different weight percentages as (0.5%, 1% and 1.5%) through powder metallurgy route. The fabricated MMNCs were tested for hardness property. The 98.5% Cu 1.5% nano B4C MMNCs has highest hardness. Hence, for further study this particular MMNC was selected. newlineIn phase I of the research work, micro groves were cut on the surfaces of Cu-B4C MMNCs by 10 µm fiber laser spot beam. Response Surface Methodology-I optimal design was then attempted to optimize the laser machining factors like laser power, number of passes, scanning speed and frequency with the intention to obtain the least surface roughness, minimum kerf width, lower heat affected zone, higher depth and higher material removal. An atomic force microscope is used to inspect the surface characteristics by measuring the roughness values of the surfaces adjacent to the top of micro-grooves. A 3D spectroscopy investigated the depth of the groove produced by the fiber laser. Results indicate that a minimum surface roughness of 23.06 nm and a minimum kerf width of 35.49 µm are obtained in the run order 2. Similarly, the groove with a maximum depth of cut of 245.87 µm is achieved in the run order 3. newline newline |
Pagination: | xxi,142p. |
URI: | http://hdl.handle.net/10603/519977 |
Appears in Departments: | Faculty of Mechanical Engineering |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
01_title.pdf | Attached File | 253.79 kB | Adobe PDF | View/Open |
02_prelim pages.pdf | 2.65 MB | Adobe PDF | View/Open | |
03_contents.pdf | 92.87 kB | Adobe PDF | View/Open | |
04_abstracts.pdf | 163.31 kB | Adobe PDF | View/Open | |
05_chapter1.pdf | 417.25 kB | Adobe PDF | View/Open | |
06_chapter2.pdf | 244.59 kB | Adobe PDF | View/Open | |
07_chapter3.pdf | 750.88 kB | Adobe PDF | View/Open | |
08_chapter4.pdf | 2.9 MB | Adobe PDF | View/Open | |
09_chapter5.pdf | 2.46 MB | Adobe PDF | View/Open | |
10_annexures.pdf | 151.76 kB | Adobe PDF | View/Open | |
80_recommendation.pdf | 659.65 kB | Adobe PDF | View/Open |
Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).
Altmetric Badge: