Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/519614
Full metadata record
DC FieldValueLanguage
dc.coverage.spatialDevelopment and characterization of Co extruded al ti bimetal macro composite
dc.date.accessioned2023-10-22T05:28:45Z-
dc.date.available2023-10-22T05:28:45Z-
dc.identifier.urihttp://hdl.handle.net/10603/519614-
dc.description.abstractThe aluminium composites are engaged in most of the aerospace and automobile applications. To improve the survival of aluminium in extreme environment such as nose, wings, and floors of aircraft improved properties are essential. In this current study, two different material with different properties are joined together to form a new bimetallic material. Softer Al-6061 is used as sleeve and grade II Ti is used as core were prepared through the co-extrusion process at a temperature of 400°C with the ratios of 2:1 and 2:0.5. Taguchi technique is adopted to verify the optimized process parameters of the co-extrusion process and found the most influencing factor for the hardness improvement. The fabricated macro composites are characterized, and mechanical and tribological properties are analyzed. The SEM is used to analyze the bonding characteristics of the materials. The properties such as resistance to point load and the bimetal composite tensile strength are tested using the hardness tester and UTM. The corrosion behaviour of the composite is tested using a polarization test. The development of the diffusion layer is observed at the boundary of Al-Ti material, and the bonding is improved. Compared to aluminium alloy and 2:1 bimetal composite, the co-extruded Al-Ti with the ratio of 2:0.5 bimetal composite ratio shows better microstructure and mechanical and tribological properties. newline newline newline
dc.format.extentxvi, 115 p.
dc.languageEnglish
dc.relationp. 105-114
dc.rightsuniversity
dc.titleDevelopment and characterization of Co extruded al ti bimetal macro composite
dc.title.alternative
dc.creator.researcherArun Kumar S
dc.subject.keywordCo-extrusion; Aluminium 6061
dc.subject.keywordEngineering
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Mechanical
dc.subject.keywordTitanium Grade II; Mechanical;
dc.subject.keywordTribological properties.
dc.description.note
dc.contributor.guideAlphin M S
dc.publisher.placeChennai
dc.publisher.universityAnna University
dc.publisher.institutionFaculty of Mechanical Engineering
dc.date.registered
dc.date.completed2022
dc.date.awarded2022
dc.format.dimensions21 cm.
dc.format.accompanyingmaterialNone
dc.source.universityUniversity
dc.type.degreePh.D.
Appears in Departments:Faculty of Mechanical Engineering

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File22.74 kBAdobe PDFView/Open
02_prelim_pages.pdf1.37 MBAdobe PDFView/Open
03_content.pdf15.42 kBAdobe PDFView/Open
04_abstract.pdf12.47 kBAdobe PDFView/Open
05_chapter 1.pdf217.88 kBAdobe PDFView/Open
06_chapter 2.pdf409.66 kBAdobe PDFView/Open
07_chapter 3.pdf704.49 kBAdobe PDFView/Open
08_chapter 4.pdf646.05 kBAdobe PDFView/Open
09_annexures.pdf584.68 kBAdobe PDFView/Open
80_recommendation.pdf66.38 kBAdobe PDFView/Open


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: