Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/511567
Title: Multiband Antenna Structures for Heterogeneous Wireless Systems with Improved Performance
Researcher: Parkash, Davinder
Guide(s): Khanna, Rajesh
Keywords: Engineering
Engineering and Technology
Engineering Electrical and Electronic
University: Thapar Institute of Engineering and Technology
Completed Date: 2015
Abstract: The field of wireless and mobile communication is growing at very fast rate covering many technical areas. With the recent progress and rapid increase in mobile terminals, the design of multiband antennas for small mobile terminals is acquiring great importance. Research on microstrip antenna systems has been a warm topic in current years due to the demands for compact and multiband antennas for next generation heterogeneous wireless communications systems. Wi-Fi/WLAN/WiMAX technologies are most rapidly growing area in the modern wireless communication. This provides greatly increased freedom and flexibility such that user can move around within a broad coverage area and still be connected to the network. There have been growing demands for broadband and multiband antenna with compact size. Devices having compact size internal antennas have appeared to fulfill this need. In this work, the multiband and compact size microstrip antenna has been proposed to cover operating bandwidth requirements of various wireless standards like Wi-Fi/WLAN/WiMAX and UWB. Analytical models provide a basic understanding of the operation of a patch antenna and they also provide approximate dimensions of a patch antenna for a targeted frequency without using numerical simulations. The objective of this thesis is to provide compact, efficient and multiband microstrip antenna designs for heterogeneous wireless communication devices. All these proposed designs contribute to the development of wireless devices for the fourth generation wireless communication systems. Theoretical analysis and simulation is performed by using IE3D simulator and a photolithography process is used for fabrication of the proposed antenna and prototype antenna is tested with help of vector network analyzer to validate the simulated results. The various antenna characteristics of all the proposed antennas like return loss, current distribution, gain, efficiency and radiation pattern has been analyzed and plotted.
Pagination: 124p.
URI: http://hdl.handle.net/10603/511567
Appears in Departments:Department of Electronics and Communication Engineering

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File61.24 kBAdobe PDFView/Open
02_prelim pages.pdf7.86 MBAdobe PDFView/Open
03_content.pdf87.33 kBAdobe PDFView/Open
04_abstract.pdf3.07 MBAdobe PDFView/Open
05_chapter 1.pdf588.76 kBAdobe PDFView/Open
06_chapter 2.pdf241 kBAdobe PDFView/Open
07_chapter 3.pdf2.66 MBAdobe PDFView/Open
08_chapter 4.pdf1.04 MBAdobe PDFView/Open
09_chapter 5.pdf1.73 MBAdobe PDFView/Open
10_chapter 6.pdf1.34 MBAdobe PDFView/Open
11_chapter 7.pdf110.61 kBAdobe PDFView/Open
12_annexures.pdf149.15 kBAdobe PDFView/Open
80_recommendation.pdf148.93 kBAdobe PDFView/Open
Show full item record


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: