Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/478380
Title: Experimental investigations on double tool turning process
Researcher: Kalidasan, R
Guide(s): Senthilvelan, S and Dixit, Uday Shanker
Keywords: Engineering
Engineering and Technology
Engineering Mechanical
University: Indian Institute of Technology Guwahati
Completed Date: 2017
Abstract: Machining is a widely used manufacturing process This work explores the simultaneous machining by two single point cutting tools to enhance the productivity of the turning process In order to perform a double tool turning process a conventional lathe was modified A tool holding fixture was developed and mounted at the rear side of the lathe carriage In double tool turning process the various process parameters are cutting speed feed depth of cut and distance between the two cutting tools
Pagination: Not Available
URI: http://hdl.handle.net/10603/478380
Appears in Departments:DEPARTMENT OF MECHANICAL ENGINEERING

Files in This Item:
File Description SizeFormat 
01_fulltext.pdfAttached File8.7 MBAdobe PDFView/Open
04_abstract.pdf152.91 kBAdobe PDFView/Open
80_recommendation.pdf405.78 kBAdobe PDFView/Open
Show full item record


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: