Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/452670
Full metadata record
DC FieldValueLanguage
dc.coverage.spatial
dc.date.accessioned2023-01-24T09:28:07Z-
dc.date.available2023-01-24T09:28:07Z-
dc.identifier.urihttp://hdl.handle.net/10603/452670-
dc.description.abstractMagnetic induction (MI) communication is a growing and promising physical layer technology for underground and underwater applications like pipeline leakage detection, border patrolling, soil condition monitoring crude oil monitoring and so on. MI communication technique has advantageous features like constant channel condition, negligible propagation delay and relatively large communication range as compared to radio frequency (RF) communication. In this technique, the coil itself acts as an antenna. For a simple MI transceiver system the communication range was a few meters. But, in order to cater the needs of long distance applications, the transmission range of MI system needs to be improved. This was accomplished by developing MI waveguide technique. A typical MI waveguide consists of transmitter and receiver coils separated by equally spaced relay coils. The existing waveguide technique uses single layer coils (SLCs). Compared to the single layer coil a multi-layered coil (MLC) has more self-inductance, more magnetic flux and at the same time more resistance. A MLC appears to be more efficient than a SLC on one hand, and on the other hand, it can result in losses too. Thus, there is a possibility of trade-off in performance. With this observation, we tried to enhance the performance of MI communication system by incorporating MLCs in waveguide structure. newlineIn this work, firstly we mathematically modeled the ohmic resistance, self-inductance, mutual inductance of MLCs. By incorporating MLCs in MI waveguide system, the transmission range is significantly enhanced. It is observed that the MI system is exhibiting better propagation characteristics in dry soil as compared to wet soil and fresh water media. In this analysis, the system bandwidth is found to be less than 1 kHz. This bandwidth is sufficient for low data rate applications. However, for some data critical applications like mine disaster rescue, border sensing the MI system bandwidth needs to be further enhanced. newline
dc.format.extent92
dc.languageEnglish
dc.relation
dc.rightsuniversity
dc.titlePerformance Enhancement of Magnetic Induction Communication System Using Multilayer Coil Antenna
dc.title.alternative
dc.creator.researcherDandu, Sandeep
dc.subject.keywordEngineering
dc.subject.keywordEngineering and Technology
dc.subject.keywordEngineering Electrical and Electronic
dc.description.note
dc.contributor.guideSengupta, Joydeep
dc.publisher.placeNagpur
dc.publisher.universityVisvesvaraya National Institute of Technology
dc.publisher.institutionElectronics and communication
dc.date.registered2016
dc.date.completed2023
dc.date.awarded2023
dc.format.dimensions
dc.format.accompanyingmaterialDVD
dc.source.universityUniversity
dc.type.degreePh.D.
Appears in Departments:Electronics and communication

Files in This Item:
File Description SizeFormat 
1. title.pdfAttached File49.31 kBAdobe PDFView/Open
3. list of contents.pdf206.36 kBAdobe PDFView/Open
4. abstract.pdf8.84 kBAdobe PDFView/Open
80_recommendation.pdf74.78 kBAdobe PDFView/Open
annexure.pdf627.46 kBAdobe PDFView/Open
chapter 1.pdf71.83 kBAdobe PDFView/Open
chapter 2.pdf728.46 kBAdobe PDFView/Open
chapter 3.pdf1.29 MBAdobe PDFView/Open
chapter 4.pdf760.06 kBAdobe PDFView/Open
chapter 5.pdf1.02 MBAdobe PDFView/Open
prelim pages.pdf1.04 MBAdobe PDFView/Open


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: