Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/426443
Title: Development of Copper Telluride based Thermoelectric Materials Synthesis Microstructure and Properties
Researcher: Mukherjee, Shriparna
Guide(s): Chattopadhyay, Kamanio and Mallik, Ramesh Chandra and Suwas, Satyam
Keywords: Energy and Fuels
Engineering and Technology
Material Science
University: Indian Institute of Science Bangalore
Completed Date: 2019
Abstract: Thermoelectric materials play an important role in harvesting the waste heat into useful electrical energy. Since thermoelectricity can lead to a clean energy conversion technology, it is important to find suitable TE materials. The state-of-the-art thermoelectric materials comprises mostly of tellurides due to their favourable transport properties. In this thesis, the structural and thermoelectric properties of copper telluride based alloys have been explored. Copper telluride belongs to the Phonon Liquid Electron Crystal (PLEC) class of materials owing to its mobile Cu ions which migrates easily inside the crystal lattice. The mobile Cu ions restrict the propagation of transverse phonon vibrations during heat transfer. This facilitates the reduction of thermal conductivity making it a suitable choice as thermoelectric material. However, formation of copper vacancies results in high hole carrier concentration (~ 1021 cm-3), which degrades the thermoelectric properties and long-term stability of Cu2Te. Moreover, the crystal structure corresponding to the different phases in Cu-Te is still ambiguous. This pose challenges in proper understanding of the properties of the Cu-Te alloys. Therefore, in the first part of the thesis, the formation of different crystal structures with changes in stoichiometry between Cu and Te has been investigated. The increase in carrier concentration with decrease in Cu:Te stoichiometry was observed. High carrier concentration led to poor power factor and lower thermoelectric figure of merit (zT). It was concluded that in order to enhance the thermoelectric performance of Cu2Te, the carrier concentration has to be decreased by compensating the copper vacancies. In the second part of the thesis, Cu2Te was alloyed with Fe to tune the charge carrier concentration. Substitution of trivalent Fe at the monovalent Cu site resulted in the compensation of hole-carrier concentration and led to an enhancement in power factor. The liquid-like mobility of Cu ions was also suppressed as confi...
Pagination: xxiv, 197
URI: http://hdl.handle.net/10603/426443
Appears in Departments:Interdisciplinary Centre for Energy Research

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File87.29 kBAdobe PDFView/Open
02_prelim pages.pdf388.51 kBAdobe PDFView/Open
03_abstract.pdf166.54 kBAdobe PDFView/Open
04_table of content.pdf218.95 kBAdobe PDFView/Open
05_chapter 1.pdf934.03 kBAdobe PDFView/Open
06_chapter 2.pdf1.38 MBAdobe PDFView/Open
07_chapter 3.pdf1.57 MBAdobe PDFView/Open
08_chapter 4.pdf2 MBAdobe PDFView/Open
09_chapter 5.pdf2.57 MBAdobe PDFView/Open
10_annexure.pdf158.68 kBAdobe PDFView/Open
80_recommendation.pdf337.94 kBAdobe PDFView/Open
Show full item record


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: