Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/426384
Title: Transition metal oxide absorbers for photovoltaics
Researcher: R, Pramod
Guide(s): Avasthi, Sushobhan
Keywords: Engineering
Engineering and Technology
Engineering Multidisciplinary
Nanoscience
University: Indian Institute of Science Bangalore
Completed Date: 2021
Abstract: Several oxides are non-toxic, stable, and can be deposited using inexpensive techniques on a variety of substrates. There is a compelling case for use of oxide in photovoltaics, referred to as all-oxide photovoltaics . Traditional photovoltaics technologies often use oxides, e.g. as transparent electrodes (SnO2: F. In2O3: SnO2, etc.) or carrier-selective contacts (TiO2, MoOx, etc.). However, oxides are rarely used as light-absorbers because oxides tend to have large bandgap (gt 2 eV), low hole mobility (lt 10-4 cm2/Vs), and low carrier diffusion lengths (lt100 nm). Despite considerable effort, few oxides have been demonstrated as efficient solar absorbers. One class of oxides still poorly investigated, are the multi-cation transition oxides. This is a very large library, so it is conceivable that good solar absorbers are waiting to be discovered. In this work, we present a study of three multi-cation transition metal oxides for their application in solar cells: Zn2Mo3O8, Mn2V2O7, and Ag2CrO4. Zn2Mo3O8 is a non-centrosymmetric oxide with a low-bandgap of 2.1 eV. Polycrystalline films deposited at room temperature are n-type with Hall mobility of 0.6 - 0.7 cm2V-1s-1. DFT calculations suggest that the valence band is composed of both O 2p and Mo 3d orbitals which could lead to higher hole mobility than that typical oxides. The valence band composition was experimentally determined using resonant photoelectron spectroscopy, which confirms this assertion. Unfortunately, DFT calculations also show that ZMO has high energy Frenkel excitons (0.78 eV), which will not dissociate at room-temperature, leading to reduced voltage in solar cells. Au/ZMO/TiO2 Schottky diodes with ZMO films deposited at room temperature show photoresponse but no photovoltage. This shows that ZMO is a carrier conducting semiconductor that can be used in a photodetector but not as a solar absorber. Mn2V2O7(MVO) was previously demonstrated as a photocatalyst with a low bandgap of 1.6 eV...
Pagination: xviii, 182
URI: http://hdl.handle.net/10603/426384
Appears in Departments:Centre for Nano Science and Engineering

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File158.19 kBAdobe PDFView/Open
02_prelim pages.pdf698.29 kBAdobe PDFView/Open
03_contents.pdf242.4 kBAdobe PDFView/Open
04_abstract.pdf223.61 kBAdobe PDFView/Open
05_chapter 1.pdf713.55 kBAdobe PDFView/Open
06_chapter 2.pdf1.05 MBAdobe PDFView/Open
07_chapter 3.pdf2.2 MBAdobe PDFView/Open
08_chapter 4.pdf1.87 MBAdobe PDFView/Open
09_chapter 5.pdf837.46 kBAdobe PDFView/Open
10_chapter 6.pdf822.4 kBAdobe PDFView/Open
11_chapter 7.pdf95.53 kBAdobe PDFView/Open
12_annexure.pdf462.21 kBAdobe PDFView/Open
80_recommendation.pdf252.77 kBAdobe PDFView/Open
Show full item record


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: