Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/332164
Full metadata record
DC FieldValueLanguage
dc.coverage.spatialAssessment of tribological properties of polyamides with various biolubricants
dc.date.accessioned2021-07-19T06:37:13Z-
dc.date.available2021-07-19T06:37:13Z-
dc.identifier.urihttp://hdl.handle.net/10603/332164-
dc.description.abstractPolyamide occupies a vital role in all categories of industries, due to its beneficial characteristics such as low coefficient of friction, better toughness, impact resistance and abrasion resistance. Polyamides are polymers in which the repeating units are held together by the amide group. However, the polyamide has few limitations such as less resistance to fatigue, less dimensional stability and also greatly affected by moisture and temperature. Thus, an investigation is required to improve the tribological properties of polyamides. In this regard, the reinforcing polyamides by fillers such as glass fibre, molybdenum disulphide, polytetrafluoroethylene and silicon have become an effective way for enhancing the properties of polyamides. Addition of filler with polyamides that improves rigidity, resistance to vibration, resistance to fatigue and corrosion and mainly withstands in high temperature during the dynamic motion. To improve the tribological properties of polyamide, mineral oil lubricants are applied between the contact surfaces, to reduce friction. Due to the demand for source of petroleum and excessive cost, the petroleum based lubricants have been replaced by bio lubricant since it produces less toxin in working environment, reduces fewer skin diseases, offers better safety at higher flash points, produces constant viscosity, less oil mist and reduces vapour emission at higher boiling temperature. newline
dc.format.extentxl,391p.
dc.languageEnglish
dc.relationp.377-390
dc.rightsuniversity
dc.titleAssessment of tribological properties of polyamides with various biolubricants
dc.title.alternative
dc.creator.researcherNarendran, J
dc.subject.keywordTribological properties
dc.subject.keywordPolyamides
dc.subject.keywordVapour emission
dc.description.note
dc.contributor.guideKarthikeyan, T
dc.publisher.placeChennai
dc.publisher.universityAnna University
dc.publisher.institutionFaculty of Mechanical Engineering
dc.date.registered
dc.date.completed2020
dc.date.awarded2020
dc.format.dimensions21cm
dc.format.accompanyingmaterialNone
dc.source.universityUniversity
dc.type.degreePh.D.
Appears in Departments:Faculty of Mechanical Engineering

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File24.04 kBAdobe PDFView/Open
02_certificates.pdf276.1 kBAdobe PDFView/Open
03_vivaproceedings.pdf470.56 kBAdobe PDFView/Open
04_bonafidecertificate.pdf305.71 kBAdobe PDFView/Open
05_abstracts.pdf7.66 kBAdobe PDFView/Open
06_acknowledgements.pdf330.63 kBAdobe PDFView/Open
07_contents.pdf37.74 kBAdobe PDFView/Open
08_listoftables.pdf28.43 kBAdobe PDFView/Open
09_listoffigures.pdf215.46 kBAdobe PDFView/Open
10_listofabbreviations.pdf22.62 kBAdobe PDFView/Open
11_chapter1.pdf588.12 kBAdobe PDFView/Open
12_chapter2.pdf849.99 kBAdobe PDFView/Open
13_chapter3.pdf217.44 kBAdobe PDFView/Open
14_chapter4.pdf39.97 kBAdobe PDFView/Open
15_chapter5.pdf6.89 MBAdobe PDFView/Open
16_conclusion.pdf162.28 kBAdobe PDFView/Open
17_references.pdf307.65 kBAdobe PDFView/Open
18_listofpublications.pdf230.49 kBAdobe PDFView/Open
80_recommendation.pdf183.71 kBAdobe PDFView/Open


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: