Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/262482
Title: Hydrodynamic Analysis Of Diand#64256;erent Conand#64257;gurations Of Journal Bearings Under Various Operating Conditions
Researcher: Anil B. Shinde
Guide(s): Prashant M. Pawar
Keywords: Engineering and Technology,Engineering,Engineering Mechanical
Hydrodynamic, Surface, Numerical Analysis
University: Solapur University
Completed Date: 31-12-2017
Abstract: Analysis of hydrodynamic journal bearing with diand#64256;erent conand#64257;gurations is carried out to enhance the performance characteristics using partial surface texturing and addition of nanoparticles in lubricant. The performance analysis of journal bearing is numerically performed using the thin and#64257;lm and#64258;ow physics of COMSOL Multiphysics 5.0 software. The static performance characteristics like and#64258;uid and#64257;lm pressure (FFP), load carrying capacity (LCC), frictional torque (FT), frictional power loss (FPL), shear rate and temperature rise are studied for various geometrical as well as operating conditions for smooth surface cylindrical shape journal bearing. This baseline model is validated with results obtained from the literature. The validated baseline model is modiand#64257;ed using diand#64256;erent conand#64257;gurations of surface texturing. Analysis of journal bearing with partial texturing, comparative analysis of groove and ellipsoidal dimple shape texturing is carried out. Further, investigation of conical shape journal bearing with partial dimple shape surface texturing is also conducted. After that, a multi-objective optimization approach is used to determine the optimal surface texturing parameters to improve the performance of a hydrodynamic journal bearing. The numerical attempts are made using Taguchi s orthogonal L27 array. The bearing performance is analyzed for various groove parameters viz. groove location, groove width, groove height, number of grooves and spacing between grooves. Grey relational analysis method is used to and#64257;nd an optimal set of parameters which will give maximum and#64258;uid and#64257;lm pressure and load carrying capacity with minimum frictional torque, power loss. Further, optimization of ellipsoidal dimple shape textured journal bearing is performed. newline
Pagination: 
URI: http://hdl.handle.net/10603/262482
Appears in Departments:Department of Mechanical Engineering

Files in This Item:
File Description SizeFormat 
abstract.pdfAttached File116.35 kBAdobe PDFView/Open
acknowledge.pdf74.99 kBAdobe PDFView/Open
certificate.pdf72.04 kBAdobe PDFView/Open
chapter 1.pdf134.03 kBAdobe PDFView/Open
chapter 2.pdf216.57 kBAdobe PDFView/Open
chapter 3.pdf1.38 MBAdobe PDFView/Open
chapter 4.pdf4.97 MBAdobe PDFView/Open
chapter 5.pdf3.92 MBAdobe PDFView/Open
chapter 6.pdf3.37 MBAdobe PDFView/Open
chapter 7.pdf99.34 kBAdobe PDFView/Open
content.pdf98.31 kBAdobe PDFView/Open
declertion.pdf71.76 kBAdobe PDFView/Open
list of figure.pdf106 kBAdobe PDFView/Open
list of publication.pdf72.47 kBAdobe PDFView/Open
list of table.pdf122.84 kBAdobe PDFView/Open
nomenclatures.pdf133.56 kBAdobe PDFView/Open
references.pdf141.13 kBAdobe PDFView/Open
title .pdf44.39 kBAdobe PDFView/Open
Show full item record


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: