Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/16684
Title: Experimental investigation on the performance, combustion and emission characteristics of DI diesel engine powered by biofuels
Researcher: Anandavelu K
Guide(s): Alagumurthi N
Keywords: Biofuels
Diesel engine
Diesel Fuel
Mechanical Engineering
Upload Date: 4-Mar-2014
University: Anna University
Completed Date: 01/10/2011
Abstract: The demand for the energy has increased drastically as a result of the rapid growth in industrialisation, urbanisation and higher standard of living. The present fossil fuel crisis associated with increase in vehicle population is posing a challenge all over the world. The augmentation of the use of automobiles manifold every year and the tail pipe emissions are also increasing abnormally leading to air pollution and human health degradation. Scientists and researchers have to focus their attention on finding an ecofriendly, energy efficient fuel to replace fossil fuel, particularly diesel in transport sectors. The main objective of the present work is to use alternative fuels which are renewable in nature and performing better than Diesel Fuel (DF). Our context is to utilize biofuels namely eucalyptus oil and turpentine oil as a replacement to diesel fuel. In first phase, the work was carried out to analyse the performance, combustion and emission characteristics of direct injection diesel engine powered by blends of eucalyptus oil with diesel fuel and standard DF operated with standard Compression Ratio (CR 17.5) and various compression ratios (CR15, CR16, CR17 and CR18). For this purpose, five different blends containing 10, 20, 30, 40 and 50 % of eucalyptus oil with diesel fuel were prepared in volume basis and tested in engine run with standard compression ratio (CR 17.5). Results indicated that the Brake Thermal Efficiency (BTE) is increased about 6.2% for 60:40 Diesel Fuel / Eucalyptus Oil Fuel (DF/EOF) blend as compared to DF. Further the results showed that 60:40 DF/EOF blend has 16.7%, 25 % and 15.15% reduction of smoke, Carbonmonoxide (CO) and Unburnt Hydrocarbon (UBHC) emission as compared to standard DF at full load condition respectively. Oxides of Nitrogen (NOX) emission is slightly reduced for this blend as compared to DF. The heat release rate and cylinder pressures are increased positively.
Pagination: xxv,193p.
URI: http://hdl.handle.net/10603/16684
Appears in Departments:Faculty of Mechanical Engineering

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File37.48 kBAdobe PDFView/Open
02_certificates.pdf582.63 kBAdobe PDFView/Open
03_abstract.pdf13.54 kBAdobe PDFView/Open
04_acknowledgement.pdf6.19 kBAdobe PDFView/Open
05_contents.pdf38.45 kBAdobe PDFView/Open
06_chapter 1.pdf183.62 kBAdobe PDFView/Open
07_chapter 2.pdf132.06 kBAdobe PDFView/Open
08_chapter 3.pdf245.18 kBAdobe PDFView/Open
09_chapter 4.pdf1.05 MBAdobe PDFView/Open
10_chapter 5.pdf2.74 MBAdobe PDFView/Open
11_appendix.pdf129.75 kBAdobe PDFView/Open
12_references.pdf39.26 kBAdobe PDFView/Open
13_publications.pdf6.68 kBAdobe PDFView/Open
14_vitae.pdf6.04 kBAdobe PDFView/Open
Show full item record


Items in Shodhganga are licensed under Creative Commons Licence Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0).

Altmetric Badge: