Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/9021
Title: Beam dynamics studies and the design, fabrication and testing of superconducting radiofrequency cavity for high intensity proton accelerator
Researcher: Arun Saini
Guide(s): Kirti Ranjan
Keywords: Physics
Fermilab
Beam dynamics
fabrication
proton accelerator
Upload Date: 21-May-2013
University: University of Delhi
Completed Date: 2012
Abstract: The application horizon of particle accelerators has been widening significantly in recent decades. Where large accelerators have traditionally been the tools of the trade for high-energy nuclear and particle physics, applications in the last decade have grown to include large-scale accelerators like synchrotron light sources and spallation neutron sources. Applications like generation of rare isotopes, transmutation of nuclear reactor waste, sub-critical nuclear power, generation of neutrino beams etc. are next area of investigation for accelerator scientific community all over the world. Such applications require high beam power in the range of few mega-watts (MW). One such high intensity proton beam facility is proposed at Fermilab, Batavia, US, named as Project-X. Project-X facility is based on H_ linear accelerator (linac), which will operate in continuous wave (CW) mode and accelerate H_ ion beam with average current of 1 mA from kinetic energy of 2.5 MeV to 3 GeV to deliver 3MW beam power. One of the most challenging tasks of the Project-X facility is to have a robust design of the CW linac which can provide high quality beam to several experiments simultaneously. Hence a careful design of linac is important to achieve this objective. Hfi ion is non-relativistic at kinetic energy of 2.5 MeV and its velocity changes very rapidly with acceleration in Project-X linac. Thus, the linac uses several types of accelerating structures which are optimized for different particle velocities to provide efficient acceleration. Project-X linac has evolved over recent years from pulsed version to continuous wave (CW) version, so cavities are designed for both of these versions using simulation approach. In the pulsed (earlier) version of the linac, there already exists a 11-cell, 1.3 GHz design of cavity. HOMs study of the cavity is performed and asymmetrical design of the end cell is proposed. Further, an alternate version of the cavity design based on 9-cell is also proposed.
Pagination: xxi, 185p.
URI: http://hdl.handle.net/10603/9021
Appears in Departments:Dept. of Physics

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File130.41 kBAdobe PDFView/Open
02_declaration.pdf9.97 kBAdobe PDFView/Open
03_dedication.pdf86.69 kBAdobe PDFView/Open
04_acknowledgements.pdf63.62 kBAdobe PDFView/Open
05_abstract.pdf115 kBAdobe PDFView/Open
06_list of publications.pdf99.57 kBAdobe PDFView/Open
07_contnets.pdf160.3 kBAdobe PDFView/Open
08_list of figures.pdf207.09 kBAdobe PDFView/Open
09_list of tables.pdf132.8 kBAdobe PDFView/Open
10_chapter 1.pdf683.31 kBAdobe PDFView/Open
11_chapter 2.pdf1.53 MBAdobe PDFView/Open
12_chapter 3.pdf18.39 MBAdobe PDFView/Open
13_chapter 4.pdf13.15 MBAdobe PDFView/Open
14_chapter 5.pdf3.75 MBAdobe PDFView/Open
15_chapter 6.pdf155.99 kBAdobe PDFView/Open
16_references.pdf208.29 kBAdobe PDFView/Open
17_abstract.pdf74.08 kBAdobe PDFView/Open


Items in Shodhganga are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: