Please use this identifier to cite or link to this item:
Title: Process monitoring of hard turning using acoustic emission technique
Researcher: Bhaskaran, J
Guide(s): Murugan, M
Keywords: acoustic emission technique
mechanical engineering
Process monitoring
Upload Date: 22-Sep-2014
University: Anna University
Completed Date: 01/12/2011
Abstract: Hard turning as a manufacturing process is slowly gaining newlineindustrial acceptance Over the last four decades the process has been newlinestabilized and appropriate machine tools cutting conditions tool materials newlineand tool geometry have evolved High wear rates of the cutting tool newlinedeterioration in the surface finish due to excessive tool wear and white layer newlineformation are some of the major problems hindering wider industrial newlineacceptance Most of these issues can be satisfactorily addressed by having a newlinereliable and robust monitoring system in place newlineMany attempts have been made to monitor the tool condition in hard newlineturning Most of the methods use either the three component cutting force newlinedynamometer or an Acoustic Emission AE sensor for monitoring the process newline newline
Pagination: xvi,87p.
Appears in Departments:Faculty of Mechanical Engineering

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File11.82 kBAdobe PDFView/Open
02_certificates.pdf548.54 kBAdobe PDFView/Open
03_abtract.pdf12.22 kBAdobe PDFView/Open
04_acknowledgement.pdf6.31 kBAdobe PDFView/Open
05_contents.pdf20.7 kBAdobe PDFView/Open
06_chapter 1.pdf190.5 kBAdobe PDFView/Open
07_chapter 2.pdf305.79 kBAdobe PDFView/Open
08_chapter 3.pdf970.28 kBAdobe PDFView/Open
09_chapter 4.pdf1.02 MBAdobe PDFView/Open
10_chapter 5.pdf1.04 MBAdobe PDFView/Open
11_chapter 6.pdf17.58 kBAdobe PDFView/Open
12_references.pdf24.62 kBAdobe PDFView/Open
13_publications.pdf5.73 kBAdobe PDFView/Open
14_vitae.pdf5.75 kBAdobe PDFView/Open

Items in Shodhganga are protected by copyright, with all rights reserved, unless otherwise indicated.