Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/222792
Title: Studies on divided wall distillation column
Researcher: Sangal, Vikas Kumar
Guide(s): Kumar, Vineet and Mishra, I. M.
Keywords: Engineering and Technology,Engineering,Engineering Chemical
University: Thapar Institute of Engineering and Technology
Completed Date: 2012
Abstract: Distillation is the most employed, but also the most energy-intensive separation method being used in chemical process industry. Therefore, the efficient design of the distillation process is important so as to reduce the energy requirement without compromising with the product quality. Divided wall column (DWC) is an innovative design in this direction where two or more simple columns are thermally coupled into one column by providing a vertical wall, dividing the core in two parts that work as the pre- or post-fractionator column and the main column. Thermodynamically, a DWC can be considered as an equivalent of Petlyuk column; the only difference being that a DWC is built in only one shell, whereas a Petlyuk column consists of two or more columns. Simulation of a DWC is a challenging task, as it involves many connecting streams making the problem highly non-linear. Further, simulation of a DWC requires simultaneous solution of material, momentum and energy balance equations. For a simple distillation column, the momentum balance equations are important only at the mechanical design stage for the estimation of effects of pressure drop whereas these are usually neglected during theoretical design (simulation) stage as its impact on vapour-liquid equilibrium is not appreciable. The optimal design of a DWC is obtained by minimizing the energy duty, as it accounts for the major fraction of the operating cost. The design variables such as reflux ratio and split ratios interact with each other and need to be optimized simultaneously for optimal operation and design. The optimization of the DWC operation cannot be handled with the existing commercial simulation software without coupling them with an external sub-routine/ software for optimization. The structural and process parameters of a DWC are generally optimized separately and there are no reports in the open literature on the simultaneous optimization of the structural and operating parameters of a DWC.
Pagination: xviii, 177p.
URI: http://hdl.handle.net/10603/222792
Appears in Departments:Department of Chemical Engineering

Files in This Item:
File Description SizeFormat 
file10(references).pdfAttached File148.87 kBAdobe PDFView/Open
file11(appendix).pdf800.73 kBAdobe PDFView/Open
file1(title).pdf55.8 kBAdobe PDFView/Open
file2(certificate).pdf169.65 kBAdobe PDFView/Open
file3(preliminarypages).pdf740.02 kBAdobe PDFView/Open
file4(chapter1).pdf284.24 kBAdobe PDFView/Open
file5(chapter2).pdf593.46 kBAdobe PDFView/Open
file6(chapter3).pdf315.89 kBAdobe PDFView/Open
file7(chapter4).pdf475.12 kBAdobe PDFView/Open
file8(chapter5).pdf2.15 MBAdobe PDFView/Open
file9(chapter6).pdf169.12 kBAdobe PDFView/Open


Items in Shodhganga are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: