Please use this identifier to cite or link to this item:
Title: Performance analysis and process optimization of micro edm of die steel with different electrodes
Researcher: Kadirvel A
Guide(s): Hariharan P
Keywords: Material Removal Rate
Mechanical Engineering
Surface Roughness
Tool Wear Ratio
Upload Date: 10-Mar-2014
University: Anna University
Completed Date: 01/11/2013
Abstract: Rapid advancement in manufacturing industries and increasing newlinedemand for micro-parts has given rise to advancement in micro newlinemanufacturing techniques. In recent years, numerous developments in micro- newlineEDM focus on the fabrication of micro-holes, micro-tools and micro newlinecomponents. Although micro-holes are formed by different manufacturing newlinemethods, micro-EDM proves to be one of the most promising manufacturing newlinetechnologies. Even though, micro-EDM is found to be capable of newlinemanufacturing micro-holes regardless of hardness, the study on quality and newlineintegrity of discharge machined surface is shown important as it has a newlinesignificant impact on the product performance. Since an electrode with micro features is employed to cut its newlinemirror image in the workpiece, it is necessary to investigate the machining newlineefficiency of the electrodes used. Furthermore, to improve the machining newlineefficiency, it is momentous to consider the effect of various influencing input newlineand output parameters. newlineIn this study, a series of experiments were conducted with various newlineelectrodes such as tungsten, copper, copper tungsten and silver tungsten of newline300and#956;m diameter as a tool and EN24 die steel as workpiece to machine blind newlineholes of 500and#956;m depth on the workpiece using RC type generator. The combination of gap voltage, capacitance, feed rate and threshold setting were newlineconsidered for maximum Material Removal Rate (MRR), lower Tool Wear newlineRatio (TWR), Surface Roughness (SR), constrained circularity error and newlineovercut. The main aim was to identify the electrode which could enhance the newlineproduction of quality micro-holes and to have a significant contribution for newlinemodern industrial requirements. From the experimental analysis, it was found that gap voltage and newlinecapacitance exert more influence on MRR and copper followed by silver newlinetungsten exhibited better MRR. To achieve lower TWR, lower discharge level newlinewas appreciable and tungsten proved to show good performance followed by newlinesilver tungsten. newline
Pagination: xxii, 180p.
Appears in Departments:Faculty of Mechanical Engineering

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File82.06 kBAdobe PDFView/Open
02_certificates.pdf2.98 MBAdobe PDFView/Open
03_abstract.pdf8.8 kBAdobe PDFView/Open
04_acknowledgement.pdf6.42 kBAdobe PDFView/Open
05_contents.pdf33.24 kBAdobe PDFView/Open
06_chapter 1.pdf29.35 kBAdobe PDFView/Open
07_chapter 2.pdf498.09 kBAdobe PDFView/Open
08_chapter 3.pdf2.73 MBAdobe PDFView/Open
09_chapter 4.pdf9.75 MBAdobe PDFView/Open
10_chapter 5.pdf14.74 kBAdobe PDFView/Open
11_references.pdf43.95 kBAdobe PDFView/Open
12_publications.pdf5.99 kBAdobe PDFView/Open
13_vitae.pdf5.69 kBAdobe PDFView/Open

Items in Shodhganga are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetric Badge: