Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/8950
Title: A study of materials for fabrication of intermediate temperature solid oxide fuel cells electrolyte using microwave energy
Researcher: Savinder Preet Kaur
Guide(s): Singh, Anirudh P
Sharma, Sangeeta
Keywords: Chemistry
Fuel Cell Technology
Microwave
Upload Date: 17-May-2013
University: Punjab Technical University
Completed Date: 2011
Abstract: Fuel cells are emerging as an alternative for the direct conversion of fossil fuel to electrical energy. Solid Oxide Fuel Cells (SOFCs) are particularly attractive because they have the highest efficiency of any conventional fuel cell design and the potential to use many fuels including gasoline and diesel without expensive external reformers that create more volatile chemicals. Solid oxide fuel cells (SOFC) are very attractive due to their high efficiency and very low pollutant emission. Until now, solid oxide fuel cell systems have been based mainly on Yttria-stabilized zirconia (YSZ) ceramics because of their nearly pure oxygen conductivity in oxidizing and reducing atmospheres as well as good mechanical properties. ZrO2-based electrolytes however require high operating temperature of 1000°C in order to maintain high oxygen ionic conductivity. Major promising advancements have been achieved in recent years in the area of high temperature fuel cells (SOFCs). These high operating temperatures demand large fabrication costs and accelerate the degradation of the fuel cell systems, expensive materials for fuel cell interconnector, long start-up time and large energy input to heat the cell up to the operating temperature. Therefore, if fuel cells could be designed to give a reasonable power output at intermediate temperatures (IT, 400-700°C), tremendous benefits may result. In particular, in the IT range ferrite steel interconnects can be used instead of expensive and brittle ceramic materials. In addition, sealing becomes easier and more reliable; rapid start-up is possible; thermal stresses (caused by thermal expansion mismatches) are reduced; electrode sintering becomes negligible. Combined together, all these improvements result in reduced initial and operating costs. Therefore, the major trend in the present research activities on SOFCs is the reduction of the operating temperature. The problem is that lowering the operating temperatures lowers the electrolyte conductivity.
Pagination: xxii, 157p.
URI: http://hdl.handle.net/10603/8950
Appears in Departments:Department of Applied Science

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File54.79 kBAdobe PDFView/Open
02_declaration.pdf26.22 kBAdobe PDFView/Open
03_abstract.pdf66.63 kBAdobe PDFView/Open
04_dedication.pdf22.83 kBAdobe PDFView/Open
05_acknowledgement.pdf32.58 kBAdobe PDFView/Open
06_table of contents.pdf44.6 kBAdobe PDFView/Open
07_list of figures.pdf59.54 kBAdobe PDFView/Open
08_list of tables.pdf47.56 kBAdobe PDFView/Open
09_list of research papers.pdf33.86 kBAdobe PDFView/Open
10_abbreviations.pdf46.65 kBAdobe PDFView/Open
11_chapter 1.pdf897.3 kBAdobe PDFView/Open
12_chapter 2.pdf2.26 MBAdobe PDFView/Open
13_chapter 3.pdf1.06 MBAdobe PDFView/Open
14_chapter 4.pdf2.01 MBAdobe PDFView/Open
15_chapter 5.pdf407.48 kBAdobe PDFView/Open
16_chapter 6.pdf77.87 kBAdobe PDFView/Open
17_references.pdf109.31 kBAdobe PDFView/Open


Items in Shodhganga are protected by copyright, with all rights reserved, unless otherwise indicated.