Please use this identifier to cite or link to this item: http://hdl.handle.net/10603/17747
Title: Experimental and simulation analyses of superplastic forming of A16063/SiCp composites
Researcher: Vijay Ananth S
Guide(s): Kalaichelvan K
Keywords: Aluminium 6063 alloy
Aluminium Metal Matrix composites
Metal Matrix Composites
SiC particles
Superplastic
Upload Date: 16-Apr-2014
University: Anna University
Completed Date: 01/11/2013
Abstract: Superplasticity is the ability of a material to exhibit very long neck free elongation prior to its failure. If the percentage of elongation is more than 200% then the material has superplastic forming capability and if the percentage of elongation is less than 200% then it is referred as extended plasticity. The material having high strain rate sensitivity index has more elongation. The advantage of superplastic forming is that, near net shape components can be produced which reduces the cost and weight. Superplastic forming has applications in the field of aerospace, automobile, architecture industries and medical applications. In recent days the superplastic forming was done in aluminium metal matrix composites. Aluminum based particulate Metal Matrix Composites have combined properties of metallic and ceramic. The properties of Aluminium Metal Matrix composites are high specific strength and stiffness, low thermal expansion coefficient, improved tribological properties and better high temperature strength. The composites were prepared by stir casting process. Aluminium 6063 alloy, as matrix was used for production of Metal Matrix Composites and SiC particles as reinforcement. Composites were prepared with 5%, 8% and 10% volumetric percentages of SiC particles. To refine the grains, thermomechanical treatment was performed in the cast components. Thermomechanical treatment has Solutionizing, warm rolling and natural ageing processes. The cast composites were solution treated at a temperature of 520 C and water quenched. Quenched composites were warm rolled at a temperature of 400 C. The thickness was reduced from 5 mm to 2.5 mm. The components were naturally aged for three days. Equiaxed grains were formed through thermomechanical treatment and it improved the superplastic forming. After thermomechanical treatment, the SiC particles were distributed uniformly throughout the matrix material. The properties of the composites were tested by Tensile test and Hardness test.
Pagination: xxi, 175p.
URI: http://hdl.handle.net/10603/17747
Appears in Departments:Faculty of Mechanical Engineering

Files in This Item:
File Description SizeFormat 
01_title.pdfAttached File38.69 kBAdobe PDFView/Open
02_certificates.pdf743.84 kBAdobe PDFView/Open
03_abstract.pdf14.64 kBAdobe PDFView/Open
04_acknowledgement.pdf6.02 kBAdobe PDFView/Open
05_contents.pdf38.54 kBAdobe PDFView/Open
06_chapter 1.pdf332.78 kBAdobe PDFView/Open
07_chapter 2.pdf96.67 kBAdobe PDFView/Open
08_chapter 3.pdf659.61 kBAdobe PDFView/Open
09_chapter 4.pdf1.66 MBAdobe PDFView/Open
10_chapter 5.pdf116.79 kBAdobe PDFView/Open
11_chapter 6.pdf413.45 kBAdobe PDFView/Open
12_chaptper 7.pdf17.78 MBAdobe PDFView/Open
13_references.pdf33.72 kBAdobe PDFView/Open
14_publications.pdf8.33 kBAdobe PDFView/Open
15_vitae.pdf5.73 kBAdobe PDFView/Open


Items in Shodhganga are protected by copyright, with all rights reserved, unless otherwise indicated.